Dispension Kneader for Rubber and Plastic with CE and ISO9001 certificates
Rubber kneader mixer : is mainly used for rubber compound mixing and plasticizing.
3. Main technical specification:
3.1 Drive direction decided by the buyer
3.2 Total volume of mixing chamber 110L
3.3 One batch rubber capacity 95~110kg(it may adjusted by formula)
3.4 Rotors type two-wing tangential type
3.5 Rotor speed(front/back) 30/24.5r/min
3.6 Main motor power AC185kW
3.7 Tilting discharge device tilting angel 140° , motor power 5.5 kW
3.8 Overall dimension(length×width×height) 4075×2712×3580mm
3.9 Weight about 14.9 t
All parameters:
size | X(S)N- 20X32 |
X(S)N- 35X30 |
X(S)N- 55X30 |
X(S) N75X30 |
X(S)N-110x30 | X(S)N- 150x30 |
X(S)N- 200x30 |
Total volume of mixing chamber | 45 | 75 | 125 | 180 | 250 | 325 | 440 |
Working volume of mixing chamber | 20 | 35 | 55 | 75 | 110 | 150 | 200 |
Driving motor power (KW) | 30 | 55 | 75 | 110 | 185 | 220 | 280 |
Tilting motor power (KW) | 1.5 | 2.2 | 2.2 | 4 | 4 | 5.5 | 7.5 |
Tilting angle (°) | 140 | 140 | 140 | 140 | 140 | 140 | 140 |
Rotational speed of the rotor (front/rear) r/min |
32/25 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 |
Pressure of compressed air (MPa) | 0.5-0.8 | 0.5-0.8 | 0.6-0.8 | 0.6--08 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
Capacity of compressed air(m3/min) | ≥0.7 | ≥0.9 | ≥1.0 | ≥1.0 | ≥1.5 | ≥2.0 | ≥2.0 |
Overall dimension (mm) | 2630x 1520x 2550 |
3200X 1900X 2950 |
3280X 1930X 3070 |
3330X 2620X 3340 |
3930x 3000x 3660 |
4200x 3300x 3900 |
4520x 3400x 4215 |
Weight Kg | 4500 | 6500 | 7800 | 105000 | 14500 | 19500 | 22500 |